AKW WF15 | Made to Order | Half Height Shower Doors Screens

AKW Front Access WF15 | White | Half Height Shower Doors

Consisting of :

Side A = Bi-Parting Shower Doors

AKW WF15 Features

Front Access Half Height - Made to Measure - Shower Doors & Screens ideal for assisted bathing or disabled, assisted showering solutions, offering splash protection for carers. These half height shower doors are for an alcove shower where the doors will be installed between two walls.

Practical and stylish, Contour’s attractive enclosures can be used by the whole family. Finished in white with contemporary fittings and rise & fall hinges create enclosures of style, quality and exceptional appeal that are easily accessible and simple to install.

• Doors are glazed using a high impact patterned PET material. 
• All our enclosures are manufactured entirely in the UK.
• Contour's made to measure doors can be made to any practical size & configuration. 
• Shower doors are usually made to the standard height of 750mm. You can select your doors to be made to any height between 600mm - 900mm.
• Suitable for wet floor areas or shower trays (Shower trays need a flat edge with a 40mm wide section on which to sit).
• Include an integrated corner block designed to overcome floor coving. The block can be cut at 10mm or 38mm radius.
• Lifetime guarantee when in a domestic application.
• Full height fixed panels available upon request (additional charge may apply).
• All Half-height doors must use the supplied shower curtain. The shower curtain is the primary water barrier, the doors are a splash guard.

All doors have a 180 degree swing in or out from the wall bracket/compensator. Where a configuration has a bi-fold door, the hinge connecting the 2 door panels will have a 360 degree hinge, allowing the doors to open in or out of the shower.

Ordering your AKW WF15

When measuring the area for your shower doors to fit :  

• It is important that accurate dimensions are taken, for an alcove: measure from the tile face to tile face,  or for corner configurations: the size of the proposed closed position of the doors. Measuring guide available.
• Curtain rail supplied as shown in diagram matching your chosen configuration. Contact us if you need an alternative shape / setup.
• Drop down ceiling to curtain rail supports are 600mm as standard. If you need extra long supports for a high ceiling, or need additional supports please contact us when ordering.
• If a vertical support pole is shown with your chosen configuration, the total pole height to the curtain rail is 2 metres. If you need this to be longer, please contact us before ordering. Floor to ceiling poles are also available when ordering at the same time as the doors. If they are ordered at a later date, an additional charge will apply.
• When you are ready to order, complete the details at the top of this page, giving your requirements, and add the configuration to your shopping cart.

Please contact us if you need assistance.
Please ensure you double check your measurements and requirements before ordering. All doors are made on a bespoke basis to your requirements and cannot be returned.

WF2 Not handed (Sides are of equal length)

Read all 39 customer reviews...